ID#: C00643IBMPC00 1 DS/HD 3.5 (1.44MB) DISKETTE RSIC#: CCC-643 in compressed DOS files CODE PKG NAME: CITATION2.0 COMPUTER: IBM PC PACKAGED: 08/09/95 PREVIOUS RELEASES: **************************************************************************** FILE DESCRIPTION **************************************************************************** Directory of U:\CITATION ARC EXE 32384 03-13-86 8:36p ARCE COM 7136 09-16-87 3:12a ARCE DOC 4716 09-16-87 3:12a F77L EER 9792 09-18-87 8:58a CITATIN3 ARC 300520 10-19-88 2:17p CITATIN1 ARC 294674 10-19-88 2:19p CITATIN2 ARC 336183 10-19-88 2:19p EXAMPLES ARC 213582 01-12-89 7:35p READ ME 5659 01-18-89 9:44a UNARC BAT 2018 08-09-95 12:00p 10 file(s) 1206664 bytes **************************************************************************** 1) CITATION has been transcribed with minor changes to the original code. If errors occur, please consult your CITATION manual ORNL-TM-2496. This version is CITATION2.0, Rev.2, Supplement 3 (July 1972) developed by ORNL and ported to the PC by AECL (Oct. 1988). No changes were made to the package when it was transferred to RSIC in 1995. 2) Your CONFIG.SYS file must include at least the following: buffers = 20 files=40 3) At least 578K RAM must be available. There cannot be any other resident programs (including PRINT). If you are using the shell command, make sure the "e" parameter does not exceed 800. 4) For ease of distribution CITATION is compressed using the software package, ARC. To decompress CITATION it is necessary to run UNARC.BAT. Copy UNARC.BAT from diskette to the directory of your hard disk in which you want CITATION to reside. Then execute with the syntax: unarc [drive1:] [drive2:path] where drive1: is the drive from which CITATION files are to be extracted and drive2:path is the drive and directory to which CITATION files are to be copied. ******* You will need about 2.5 MB free on your hard disk ******* 5) CITATION was tested at RSIC on a Northgate 486-50MHz pc, with MS DOS 6.0 and a Gateway 2000 P5-120MHz.